User's Manual

Right
NOTE: Refer to the illustration that most closely matches your computer.
Table 2-1 Right-side components and their descriptions
Component Description
(1) Memory card reader Reads optional memory cards that store, manage, share, or
access information.
To remove the plug from the memory card reader slot:
1. Press in gently on the push bar until the card slot plug is
ejected.
2. Remove the card slot plug from the computer.
To insert a card:
1. Hold the card label-side up, with the connectors facing the
computer.
2. Insert the card into the memory card reader, and then
press in on the card until it is rmly seated.
To remove a card:
▲ Press in on the card, and then remove it from the memory
card reader.
(2) DisplayPort™ connector (select products only) Connects an optional digital display device, such as a high-
performance monitor or projector.
(3) USB Type-C Thunderbolt™ ports (2) with HP
Sleep and Charge
Connect a USB device, provides high-speed data transfer, and
charge small devices, even when the computer is o.
– and –
Connect a display device that has a USB Type-C connector,
providing DisplayPort output.
NOTE: Your computer might also support a Thunderbolt
docking station.
NOTE: Cables, adapters, or both (purchased separately) might
be required.
(4) Power connector Connects an AC adapter.
(5) Battery light When AC power is connected:
● White: The battery charge is greater than 90%.
● Amber: The battery charge is from 0 to 90%.
● O: The battery is not charging.
4 Chapter 2 Components