Quick Start Guide

ENWW Using Auto-Sleep Mode 14
Using Auto-Sleep Mode
The monitor supports an OSD (On-Screen Display) menu option called Auto-Sleep
Mode that allows you to enable or disable a reduced power state for the monitor.
When Auto-Sleep Mode is enabled (enabled by default), the monitor will enter a
reduced power state when the host PC signals low power mode (absence of either
horizontal or vertical sync signal).
Upon entering this reduced power state (sleep mode), the monitor screen is blanked,
the backlight is turned off and the power LED indicator turns amber. The monitor
draws less than 0.5 W of power when in this reduced power state. The monitor will
wake from the sleep mode when the host PC sends an active signal to the monitor (for
example, if you activate the mouse or keyboard).
You can disable Auto-Sleep Mode in the OSD. Press one of the four front bezel
Function buttons to activate the buttons, and then press the Menu button to open the
OSD. In the OSD menu select Power Control > Auto- Sleep Mode > Off.