Specifications

Display assembly
NOTE: All display assembly spare part kits include 2 microphones, 2 speakers, and 2 WLAN antenna
transceivers and cables.
Description Spare part number
For use in model 2133:
8.9-inch, WXGA display assembly for use only with computer models equipped with camera module 483384-001
8.9-inch, WXGA display assembly for use only with computer models not equipped with camera
module
482278-001
8.9-inch, WSVGA display assembly for use only with computer models equipped with camera
module and system boards with the following spare part numbers: 498308-001, 500754-001, and
500755-001
498309-001
8.9-inch, WSVGA display assembly for use only with computer models not equipped with camera
module and system boards with the following spare part numbers: 498308-001, 500754-001, and
500755-001
502600-001
For use in model 2140:
10.1-inch, WXGA display assembly for use only with SD computer models equipped with camera
module
511743-001
10.1-inch, WXGA display assembly for use only with HD computer models equipped with camera
module
511744-001
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 44).
5. Remove the following components:
a. Keyboard (see
Keyboard on page 45)
b. Hard drive or solid-state drive (see
Mass storage device on page 49)
c. Top cover (see
Top cover on page 52)
d. Audio board (see
Audio board (Model 2133 only) on page 55)
e. System board (see
System board on page 59)
6. Disconnect the wireless antenna cables from the WLAN module (see
WLAN module on page 63).
Component replacement procedures 71