Specifications

Reverse this procedure to install a memory module.
Mass storage device
NOTE: All hard drive and solid-state drive spare part kits include a bracket and SATA adapter.
Description Spare part number
For use only in model 2133:
160-GB, 7200-rpm hard drive
482271-001
160-GB, 5400-rpm hard drive 482269-001
120-GB, 7200-rpm hard drive 482268-001
120-GB, 5400-rpm hard drive 482267-001
80-GB solid state drive 502600-001
4-GB solid state drive 482272-001
For use only in model 2140:
160-GB, 7200-rpm hard drive 511904-001
160-GB, 5400-rpm hard drive 511903-001
80-GB solid state drive 511901-001
Before removing the hard drive or solid-state drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 44).
5. Remove the keyboard (see
Keyboard on page 45).
Component replacement procedures 49