Instruction Manual

Change user password in the MSA device
Description Changes the password of an existing Manage/ Monitor user account in the
MSA device.
Syntax change
Prompts User login details needed to change the password for an existing user ac-
count, if not yet entered in this session, and then prompts for the user name
and the new password.
Output On success, acknowledges the change of the password as shown in Figure
13, page 25.
On failure, displays the error message with possible cause.
If the login fails, the correct user login details must be entered again while
re-issuing the command. Otherwise, the user login details are not required
to be entered for the remainder of the current ‘PSM Manage’ session.
Figure 13 Screenshot of change user password command
.
MSA2000 G2 SMI-S Proxy Provider User Guide 25