Instruction Manual

To assign a free port, edit the service.properties configuration file located in the
<systemdrive>\hpmsa\fcproxy folder with the SSL port number (httpsPort=xxxx) and try starting
the CIMOM again through the service application. If the service application is successful in starting
the CIMOM, it updates the service.properties file with the actual port number.
For the non-SSL connections, port 5988 must be available for the CIMOM to support non-SSL connection
requests from clients such as PSM.
On Linux, port 5989 should be free for the CIMOM to use. If it is not free, the CIMOM will fail to
start and the installation will not continue.
PSM device management commands
The PSM provides the commands described in Table 3, page 16.
Table 3 PSM commands
DescriptionShortcutOption
Adds an MSA2000 system to the server.aadd
Removes all the systems from the server.cclear
Discovers the MSA2000 storage systems in the subnet.ddiscover
Exits PSM.xexit
Displays the Indication Provider Polling Interval, Proxy Provider
Debug Log Level, and Connection Timeout values
gget
Displays PSM help.?help
Provides a user interface to manage a specific device.mmanage
Removes an MSA2000 system from the server.rremove
Sets the provider parameters to the specified values. When entered
without input attributes it displays the values.
sset
Sets the indication provider polling interval cycle to the specified
value.
s intervalset interval
Sets the proxy provider connection timeout value.s timeoutset timeout
Sets the proxy provider log level.s loglevelset loglevel
Displays the PSM version.verversion
Displays the version of the currently installed pegasus CIMOM.ver pegversion peg
Displays the systems currently added in the CIM server.vview
Displays the systems along with their object paths.v opview op
On Windows, PSM allows connection to CIMOM running on the local host or on a different system.
On Linux, PSM only allows connection to CIMOM running on the local host.
Configuring the Proxy Provider16