Instruction Manual

4 Working with SLPRs
Figure 5 P
artition Definition pane (SLPR selected)
• Tree: Displays SLPRs and CLPRs in the array. The SLPR number and name appear on the right of
the SLPR
icon (
). The CLPR number and name appear on the right of the CLPR icon ( ).
SLPRs belonging to a CU group other than the current CU group have this icon (
)and aregrayed
out. CLPRs belonging to a CU group other than the current CU group have this icon (
)and are
grayed out. You cannot select these SLPRs and CLPRs.
• SLPR re
source list: Displays information about resources in the specified SLPR (that is, CLPRs
and ports) belonging to the current CU group.
NOTE:
If you select SLPR0 in the tree, all resources (CLPRs and ports) that have not been allocated to any
SLPRs yet appear.
NOTE:
Information about CLPR0 appears regardless of which CU group is selected.
• No.:List's line number.
• Resource Type:Type of the SLPR's resources: Cache Partition or Port.
• Name:CLPR or port name.
If theresource typeis Cache Partition, the CLPR number and name appear.
HP StorageWorks
25