Quick Specs

QuickSpecs
HP N246v 23.8-inch Monitor
Technical Specifications
c05943580 – DA16180– Worldwide – Version 4 – July 16, 2018
Page 5
1. External power supplies, power cords, cables and peripherals are not Low Halogen. Service parts obtained after purchase may not be Low
Halogen.
2. The HP Quick Release has been designed to support a maximum of up to 24 lbs (10.9 kg) for all devices mounted. Because mounting
surfaces vary widely and the final mounting method and configuration may vary, mounting fasteners are not supplied (other than the VESA-
compliant screws). HP recommends that you consult with a qualified engineering, architectural or construction professional to determine the
appropriate type and quantity of mounting fasteners required for your application and to ensure that your mounting solution is properly
installed to support applied loads.
3. HP Care Packs are optional. Service levels and response times for HP Care Pack Services may vary depending on your geographic location.
Service starts from date of hardware purchase. Restrictions and limitations apply. See http://www.hp.com/go/cpc for details.
4. EPEAT® Silver where HP registers commercial display products. See www.epeat.net for registration status in your country