User's Manual
NOTE: The initial screen allows you to review and modify basic settings. Click the More link at the top
right corner of the Scan dialog box to review and modify detailed settings.
For more information, see Change scan settings (Windows).
Scan to a memory device
You can scan directly to a USB ash drive from the printer control panel without using a computer or the HP
printer software.
CAUTION: Do not remove the ash drive from the printer USB port while it is being accessed by the printer.
This can damage the les on the USB ash drive. You can safely remove a USB ash drive only when the USB
port light is not blinking.
NOTE: The printer does not support encrypted USB ash drives.
To scan an original to a USB from the printer control panel
1. Load your original print-side down on the scanner glass or print-side up in the document feeder.
2. Insert a USB ash drive.
3. Touch Scan , and then select USB.
4. Touch Setup icon to make changes to scan options, if needed.
5. Touch Save icon.
Scan to email
●
Scan to email through Scan function
Scan to email through Scan function
This section contains the following topics:
●
Set up Scan to Email
●
Scan a document or photo to email
Set up Scan to Email
To set up Scan to Email
You need to set up email addresses rst, and then scan and email your documents.
NOTE: You need a network-connected computer to set up Scan to Email.
1. From Home screen, touch Scan, and then touch Email.
2. On the Email Prole Not Set Up screen, touch Next.
3. Touch Using the HP Software Installed on a Computer or Using a Web Browser, and then follow the
onscreen message to set up email prole.
ENWW Scan 47