Quick Specs
QuickSpecs
HP ProDesk 600 G3 and HP ProOne 600 G3 Business Desktops PCs
Technical Specifications – Memory
Not all configuration components are available in all regions/countries.
c05373438 — DA 15826 — Worldwide — Version 46 — July 10, 2018
Page 93
SYSTEM MEMORY SUPPORT
The HP ProDesk 600 G3 Business PC supports the 6
th
& 7
th
generation Intel® Core™ processor family. Based on a new PC micro-
architecture, the processor is designed for a two-chip platform consisting of a processor and Platform Controller Hub (PCH). The
6
th
generation Intel® Core™ processor includes an Integrated Memory Controller (IMC). The IMC supports DDR4protocols with two
independent, 64-bit wide channels each accessing one or two DIMMs.
• Two channels of non-ECC DDR4 unbuffered dual in-line memory modules (UDIMM) or DDR4 unbuffered small outline dual
in-line memory modules (SO-DIMM) with a maximum of two DIMMs per channel
• Single-channel and dual-channel memory organization modes
• Data burst length of eight for all memory organization modes
• Memory data transfer rates of up to 2400MT/s; actual supported data transfer rate determined by the configured
processor.
• 64-bit wide channels
• DDR4 system memory I/O voltage of 1.25V
• Theoretical maximum memory bandwidth of:
o 34 GB/s in dual-channel mode assuming 2400 MT/s
PLATFORM MEMORY SUPPORT
• The Small Form Factor (SFF) and Microtower (MT) platforms support up to four (4) industry-standard DDR4-SDRAM
DIMMs.
• The Desktop Mini (DM) supports up to two (2) industry-standard DDR4-SDRAM SO-DIMMs.
• The All-in-One (AiO) platform supports up to two (2) industry-standard DDR4-SDRAM DIMMs.
CAUTION: You must shut down the computer and disconnect the power cord before adding or removing memory modules.
Regardless of the power-on state, voltage is always supplied to the memory modules as long as the computer is plugged in to an
active AC outlet. Adding or removing memory modules while voltage is present may cause irreparable damage to the memory
modules or system board.
NOTE: For systems configured with more than 3 GB of memory and a 32-bit operating system, all memory may not be available
due to system resource requirements. Addressing memory above 4 GB requires a 64-bit operating system.