Quick Specs

QuickSpecs
HP ProDesk 600 G3 and HP ProOne 600 G3 Business Desktops PCs
Technical Specifications – Hard Disk and Solid State Storage
Not all configuration components are available in all regions/countries.
c05373438 — DA 15826 — Worldwide — Version 46 — July 10, 2018
Page 87
Architecture
TLC NAND Flash
Interface
SATA 3.2 (6.0 Gb/s)
Form Factor
2.5 inch
Dimensions (W x H x D)
6.98 x 0.7 x 10.05 cm
Weight
31g
Bandwidth Performance
Sustained Sequential
Read:
Up to 510 MB/s
Sustained Sequential
Write:
Up to 330 MB/s
Random Read:
Up to 38K IOPs
Random Write:
Up to 70K IOPs
Power
DC power requirement:
5 VDC 5%-100 mV ripple p-p
Total power
consumption:
50mW (active); 20mW (idle)
Useful Drive Life
72TB written, up to 40GB/day for 5 years
Environmental
(all conditions, non-condensing)
Operating Temperature:
32° to 158° F (0° to 70° C)
Relative Humidity:
5% to 95%
Shock:
1,500 G/0.5 ms
NOTE: "For hard drives and solid state drives, GB = 1 billion bytes. TB = 1 trillion bytes. Actual formatted capacity is less. Up to 36
GB (for Windows 10) of system disk is reserved for the system recovery software."
256GB SATA 2.5" Value (Non-SED) Solid State Drive
Unformatted Capacity
256 GB
Architecture
TLC NAND Flash
Interface
SATA 3.2 (6.0 Gb/s)
Form Factor
2.5 inch