Quick Specs

QuickSpecs
HP ProDesk 600 G3 and HP ProOne 600 G3 Business Desktops PCs
Technical Specifications – Hard Disk and Solid State Storage
Not all configuration components are available in all regions/countries.
c05373438 — DA 15826 — Worldwide — Version 46 — July 10, 2018
Page 74
Typical Weight
37.4 g
Bandwidth Performance
Sustained Sequential
Read:
Up to 515 MB/s
Sustained Sequential
Write:
Up to 490 MB/s
Power
Power consumption:
Maximum active power: ≤4,400mW
Average power: 70mW
Slumber low power mode: 42mW – 52mW
Mean Time Between Failure
(MTBF)
Up to 1,750,000 hours
Environmental
(all conditions, non-condensing)
Operating Temperature:
0˚C to 70˚C (32˚F to 158˚F)
Non-operating temperature and storage
-55˚C to +85˚C (-67˚F to 185˚F)
Operating and non-operating shock
1,500 G/0.5 ms
*NOTE: For hard drives and solid state drives, GB = 1 billion bytes. TB = 1 trillion bytes. Actual formatted capacity is less. Up to 16
GB (for Windows 7) and 36 GB (for Windows 8.1/10) of system disk is reserved for the system recovery software.
256GB Turbo Drive G2 TLC Solid State Drive
Unformatted Capacity
256 GB
Architecture
Solid State Drive with TLC NAND Flash and PCIE interface.
Complies with NVMe Standard
Power Saving Modes: L1 substates support
Multi Queue support
Interface
PCI-E Gen3 x 4
Form Factor
M.2 2280
Height
3.73 mm
Width
22.00 ± 0.15 mm
Length
80.00 ± 0.15 mm
Weight
Up to 8 g