Quick Specs

QuickSpecs
HP ProDesk 600 G3 and HP ProOne 600 G3 Business Desktops PCs
Technical Specifications – Hard Disk and Solid State Storage
Not all configuration components are available in all regions/countries.
c05373438 — DA 15826 — Worldwide — Version 46 — July 10, 2018
Page 73
Form Factor
2.5 inch
Height
6.80 mm ± 0.20
Width
69.85 mm ± 0.25
Length
100.20 mm ± 0.25
Typical Weight
37.4 g
Bandwidth Performance
Sustained Sequential
Read:
Up to 520 MB/s
Sustained Sequential
Write:
Up to 460 MB/s
Power
Power consumption:
Active: 3.891W; Idle: 0.085W
Mean Time Between Failure
(MTBF)
1,500,000 hours
Environmental
(all conditions, non-condensing)
Operating Temperature:
32° to 158° F (0° to 70° C)
Relative Humidity:
5% to 95%
Shock:
1,500 G/0.5 ms
*NOTE: For hard drives and solid state drives, GB = 1 billion bytes. TB = 1 trillion bytes. Actual formatted capacity is less. Up to 16
GB (for Windows 7) and 36 GB (for Windows 8.1/10) of system disk is reserved for the system recovery software.
512 GB SATA 2.5” TLC SED SSD Opal 2 Drive*
Unformatted Capacity
512 GB
1,000,215,216 (User Addressable Sectors)
Architecture
Self-Encrypting (SED) Solid State Drive with NAND Flash and SATA interface.
Trusted Computing Group (TCG) OPAL 2.0 compliant encrypted solid state drive
Interface
Serial ATA (6.0 Gb/s)
Form Factor
2.5 inch
Height
7 mm ± 0.20
Width
69.85 mm ± 0.25
Length
100.20 mm ± 0.25