Quick Specs

QuickSpecs
HP ProDesk 600 G3 and HP ProOne 600 G3 Business Desktops PCs
Technical Specifications – Hard Disk and Solid State Storage
Not all configuration components are available in all regions/countries.
c05373438 — DA 15826 — Worldwide — Version 46 — July 10, 2018
Page 69
Form Factor
2.5 inch
Height
6.80 mm ± 0.20
Width
69.85 mm ± 0.25
Length
100.35 mm ± 0.25/0.20
Weight (typical)
<95 g (0.209 lb)
Bandwidth Performance
Sustained data transfer
rate OD
100 MB/s max
I/O data-transfer rate
600 MB/s max
Power
Power consumption:
Spinup (max): 1.00A
Idle, active: 0.70W
Sleep 0.18W
Environmental
(all conditions, non-condensing)
Operating Temperature:
32° to 140° F (0° to 60° C)
Relative Humidity:
5% to 95%
Shock:
Maximum 400 G/2 ms
*NOTE: For hard drives and solid state drives, GB = 1 billion bytes. TB = 1 trillion bytes. Actual formatted capacity is less. Up to 16
GB (for Windows 7) and 36 GB (for Windows 8.1/10) of system disk is reserved for the system recovery software.
256GB* TLC SED SSD 2.5” FIPS Drive*
Unformatted Capacity
256 GB
Architecture
Self-Encrypting (SED) Solid State Drive with SATA interface.
Interface
Serial ATA (6.0 Gb/s)
Form Factor
2.5 inch
Height
7 mm
Width
69.85 mm
Length
100.45 mm
Weight (typical)
10 g (0.022 lb) max