User Manual
Selecting a faster response time
1. Press the Menu button to open the OSD.
2. Select Image Control and then select Response Time.
3. Select one of the following levels from the Response Time menu:
Level 1 (Default)
Level 2 (Fast)
Level 3
Level 4
Level 5 (Fastest)
NOTE: The default response time is 14.0 ms. The response time can be adjusted to as fast as 5.4 ms in
the display menu. All performance specications represent the typical specications provided by HP’s
component manufacturers; actual performance may vary either higher or lower.
Selecting the Low Blue Light mode
Decreasing the blue light emitted by the display reduces the blue light exposure to your eyes. HP monitors
provide settings to reduce the blue light output and create a more relaxing and less stimulating image while
you view content on the screen. To adjust your monitor to a comfortable viewing light, follow the steps below.
1. Press one of the four OSD bezel buttons on the bottom of the monitor to display the OSD icons on the
screen.
2. Press the Viewing Modes button to open the Viewing Modes menu, or press the Menu button, select
Color Control, and then select Viewing Modes.
3. Choose one of the following settings:
●
Low Blue Light (TUV certied): Reduces blue light for improved eye comfort
●
Reading: Optimizes both blue light and brightness for indoor viewing
●
Night: Adjusts the monitor to the lowest blue light output
WARNING! To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper
workstation setup, and proper posture, health, and work habits for computer users. The Safety & Comfort
Guide also provides important electrical and mechanical safety information. The Safety & Comfort Guide is
available on the Web at http://www.hp.com/ergo.
Selecting a faster response time 17