Quick Specs

QuickSpecs

HP DreamColor Z24x G2 24-inch Display

Technical Specifications

c05477860 – DA 15913 - Worldwide — Version 2 — July 19, 2017

Page 10

The information contained herein is subject to change without notice. The only warranties for HP products are set forth in the

express limited warranty statements accompanying such products. Nothing herein should be construed as constituting an

additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

ENERGY STAR is a registered trademark owned by the U.S. Environmental Protection Agency. DisplayPort™ and the DisplayPort™

logo are trademarks owned by the Video Electronics Standards Association (VESA®) in the United States and other countries.

1. ENERGY STAR® power is measured with factory defaults, brightness at ENERGY STAR® level of 200 cd/m

and with no USB loads.

2. Default Power is measured with factory defaults, including factory default brightness and USB ports loaded at 25% of maximum.

3. Maximum Power is measured with monitor at maximum brightness and with USB ports loaded at 100% of maximum.

4. External power supplies, power cords, cables and peripherals are not Low Halogen. Service parts obtained after purchase may not be

Low Halogen.

5. EPEAT® Gold where HP registers commercial display products. See www.epeat.net for registration status in your country.

6. Service levels and response times for HP Care Pack Services may vary depending on your geographic location. Service starts from date

of hardware purchase. Restrictions and limitations apply. See http://www.hp.com/go/cpc for details.

7. 17 to 24-inch diagonal monitors need to meet supported weight limits of 6 to 12.1 lbs. (2.7 to 5.5 kg).

8. The Integrated Work Center Stand has been designed to support 17 to 24-inch diagonal HP LCD monitors from 2.3 kg to 5.2 kg (5.07 lbs

to 11.24 lbs).

9. The HP Quick Release has been designed to support a maximum of up to 24 lbs (10.9 kg) for all devices mounted. Because mounting

surfaces vary widely and the final mounting method and configuration may vary, mounting fasteners are not supplied (other than the

VESA-compliant screws). HP recommends that you consult with a qualified engineering, architectural or construction professional to

determine the appropriate type and quantity of mounting fasteners required for your application and to ensure that your mounting

solution is properly installed to support applied loads.