Quick Specs

QuickSpecs

HP EliteDisplay E273q 27-inch Monitor

Technical Specifications

c05689783 — DA 16076 — Worldwide — Version 4 — November 29, 2017

Page 10

The information contained herein is subject to change without notice. The only warranties for HP products are set forth in the

express limited warranty statements accompanying such products. Nothing herein should be construed as constituting an

additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

DisplayPort™ and the DisplayPort™ logo are trademarks owned by the Video Electronics Standards Association (VESA®) in the

United States and other countries.

Microsoft and Windows are registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or other countries.

ENERGY STAR is a registered trademark owned by the U.S. Environmental Protection Agency.

1. Default Power is measured with factory defaults, including factory default brightness and USB ports loaded at 25% of maximum.

2. Maximum Power is measured with monitor at maximum brightness and with USB ports loaded at 100% of maximum.

3. External power supplies, power cords, cables and peripherals are not Low Halogen. Service parts obtained after purchase may not

be Low Halogen.

4. EPEAT® registered where applicable. EPEAT® registration varies by country. See www.epeat.net for registration status by country.

Search keyword generator on HP’s 3rd party option store for solar energy accessory at www.hp.com/go/options.”

5. Service levels and response times for HP Care Pack Services may vary depending on your geographic location. Service starts from

date of hardware purchase. Restrictions and limitations apply. See http://www.hp.com/go/cpc for details.

6. The HP Quick Release has been designed to support a maximum of up to 24 lbs (10.9 kg) for all devices mounted. Because mounting

surfaces vary widely and the final mounting method and configuration may vary, mounting fasteners are not supplied (other than

the VESA-compliant screws). HP recommends that you consult with a qualified engineering, architectural or construction

professional to determine the appropriate type and quantity of mounting fasteners required for your application and to ensure that

your mounting solution is properly installed to support applied loads.

7. Sold separately. See product QuickSpecs for exact device and display compatibility.