User's Manual
Table Of Contents
- Getting started
- Using the monitor
- Downloading software and utilities
- The Information file
- The Image Color Matching file
- Using the OSD menu
- Changing the Power Mode setting (select products only)
- Using Auto-Sleep Mode (select products only)
- Using PiP and PbP (select products only)
- Using low blue light mode (select products only)
- DisplayPort multistreaming over DisplayPort (select models only)
- Support and troubleshooting
- Maintaining the monitor
- Technical specifications
- 60.5 cm (23.8 in) model specifications
- 61 cm (24 in) model specifications
- 68.6 cm (27 in) model specifications
- Preset display resolutions
- 60.5 cm (23.8 in) model high-definition video formats
- 61 cm (24 in) model high-definition video formats
- 68.6 cm (27 in) model high-definition video formats
- Energy saver feature
- Accessibility
1. Be sure that DisplayPort is your primary video input.
2. Add a second monitor by connecting a DisplayPort cable between the DisplayPort OUT connector on the
primary monitor and the DisplayPort connector on a secondary monitor.
NOTE: You can connect up to four additional monitors. All but the nal monitor in the chain must
support DisplayPort multistreaming. For example when daisy-chaining four monitors, three of the four
daisy-chained monitors need to have DisplayPort and DisplayPort OUT connectors. The last monitor in
the chain needs only a DisplayPort connector.
3. Set a connected monitor to display the same image as the primary monitor or a dierent image.
4. Connect the DisplayPort cable from the DisplayPort OUT connector of one monitor to the DisplayPort
connector of the next monitor.
DisplayPort multistreaming over DisplayPort (select models only) 19