User Manual
7
Specication Description
Product numbers
1AS85A; 1AS86A; 1AS87A; 1AS88A; 1AS89A; 1AS90A; 1AS91A
Dimensions and weight
• Dimensions: 3.15 x 4.63 x 0.98 in (80 x 117.5 x 25 mm)
• Weight: 0.379 lb (0.172 kg)
Connectivity
Bluetooth 5.0
Printer management
HP sprocket app
Power supply
Li-Polymer 7.4 V – 2 cell internal rechargeable battery
850 mAh Li-ion polymer battery
Charge time
120 minutes
Power consumption
0.9 W (standby)
Average 15.91 W (based on rst print)
Maximum 34.49 W at 25° C (77° F)
Print technology
Thermal printing with a ZINK™ Zero Ink® printer
• Note: The HP Sprocket does not use ink cartridges to print.
Supported paper
HP Sprocket Photo Paper—
2 x 3” (5 x 7.6 cm)
Borderless printing
Yes
Supported le types
.jpeg, .ti (iOS only), .gif, .bmp, and .png
• Note: If you send a non-supported le type, the print job does not print.
Paper tray capacity
Up to 10 pages with the Smartsheet®
Memory
64
MB
Print quality
313 x 400 dots per inch (dpi)
Mobile connectivity
• Supported by Android™ devices using OS v4.4 and above / iOS 8.0 and above
• Compatible with iPhone X, iPhone 8, iPhone 8 Plus, iPhone 7, iPhone 7 Plus, iPhone
SE, iPhone 6s, iPhone 6s Plus, iPhone 6, iPhone 6 Plus, iPhone 5s, iPhone 5c, iPhone
5, iPad (6th generation), iPad Pro 12.9-inch (2nd generation), iPad Pro 10.5-inch, iPad
(5th generation), iPad Pro 9.7-inch, iPad Pro 12.9-inch (1st generation), iPad Air 2,
iPad Air, iPad mini 2, iPad mini 3, iPad mini 4, iPad (4th generation), iPod touch (6th
generation)
Control panel
Power Button; Reset Button; Charge and Status Indicator LED Lights
Environmental parameters
• Operating humidity: 5% to 90% RH (recommended)
• Non-operating humidity: 5% to 90% RH
• Operating temperature: 5° to 40° C (41° to 104° F)
• Recommended operating temperature: 15° to 32° C (59° to 90° F)
• Storage temperature: -30° to 70° C (-22° to 158° F)
Warranty
One-year limited hardware warranty
Visit hpsprocket.com/start for more information.
Regulatory Model Number
For regulatory identication purposes, your product is assigned with a
Regulatory Model Number. The regulatory model number should not be
confused with the marketing names or product numbers. The Regulatory
Model Number for your product is VCVRA-1801.
For regulatory and safety notices, refer to the included sheet in your product packaging and the following statements.
Battery Safety
• Do not disassemble the product or battery or short the battery terminals.
• Avoid contact with a leaking or damaged battery.
• Adult supervision is recommended when the product is being used by young children.
• Do not disassemble, strike, press, or put in a re.
• Do not use the printer if the product battery is swelling and causing product expansion.
• Keep the device clear of high temperatures and moisture.
Safety Information
Specications