User Manual

Main Menu Description
Input Control Selects the video input signal.
Image Control Adjusts the screen image.
PIP Control Selects and adjusts the PIP image.
Power Control Adjusts the power settings.
Menu Control Adjusts the OSD controls.
Management Adjusts the DDC/CI settings and returns all OSD menu settings to the factory default settings.
Language Selects the language in which the OSD menu is displayed. The factory default is English.
Information Selects and displays important information about the monitor.
Exit Exits the OSD menu screen.
Assigning the function buttons
Pressing one of the four function buttons under the right side of the bezel activates the buttons and displays
the icons on the screen. The factory default button icons and functions are shown below.
Button Function
1 Menu Opens the OSD menu, selects a menu item from the OSD, or closes the OSD menu.
2 Information
Assignable function button 1
Opens the Information menu.
3 Next Active Input
Assignable function button 2
Navigates through the OSD menu and selects a video input source.
4 Viewing Modes
Assignable function button 3
Opens the Viewing Modes menu and selects a preset view mode.
You can change the assignable function buttons from their default values so that when the buttons are
activated you can quickly access commonly used menu items.
To recongure function buttons:
1. Press one of the four function buttons under the right side of the bezel to activate the buttons, and then
press the Menu button to open the OSD.
2. In the OSD menu, select Menu Control, select Assign Buttons, and then select one of the available
options for the button you want to reassign.
NOTE: You can only reassign the three assignable function buttons. You can not reassign the Menu button.
16 Chapter 2 Using the monitor