User's Manual

23
3.3 Picture in Video
You can also use this camcorder to take snapshots of the current
scene.
1. In recording status, press to capture recording screen
shots from the front (and rear) lens.
2. When the icon shows in the central of screen, it means
the screenshots is completed.
Note:
1. The screen shots image resolution quality is depending on the video resolution setting.
2. The picture resolution is limited by the speed of the target object and changes in ambient
lighting. The photograph function is better used for taking still pictures in accident scenes or
when the car is stopped to wait for a traffic light.
3.4 Driving Safety
Note:
1. The Driving Safety function is limited to triggering no more than two alarms at the same time.
If a voice and alert message have been triggered, any other alarm will be ignored until either of
the two is settled.
2. Satellite positioning must be completed before functions such as Speed Cam Alert, Speed
Position Management, Speed Limit Alert, LDWS, FCWS and FCMD to be enabled. Be sure to
check that Satellite positioning has been completed prior to using the product.
3. The detections of LDWS, FCWS and FCMD may be inaccurate when used in rain, at night
or in environments of insufficient lighting. Drivers are advised to exercise discretion based on
actual road conditions.
The following driving safety function is for reference only. Drivers are
advised to exercise discretion based on actual road conditions.