User's Manual

22
3.1.2 Emergency Recording
To Start the Emergency Recording, do the
following:
1. During Video Recording, press the
button to enter emergency
recording mode, the “Emergency”
message will be shown immediately on
the upper left corner of the screen, and
the recorded file will be protected.
2. The emergency video recording length is same as the
recording interval setting. When the emergency recording
length reaches the setting, the system will return to the general
recording mode.
Note:
1. If the Collision Detection function is enabled and a collision is detected, the camcorder will
automatically trigger the emergency recording.
2. The emergency file is created as a new file and saved in Emergency folder, which will be
protected to avoid being overwritten by normal loop recording. The Emergency folder will
occupy 40% of available memory card capacity. For example, if you use 8GB memory card,
about 3.2GB memory space will be saved for emergency files. When the Emergency folder is
full, the oldest emergency file will be automatically deleted by the newest emergency file.
3.2 Add Speed Point
You may customize speed cam positions in this product.
1. When the GPS positioning is completed , press to update
speed camera points.
2. This product features a capacity of 50 speed cam positions. In
case you are trying to add more than that, the system prompts
with message "Speed Position is full".
Note:
You may delete custom speed cam positions by selecting the Delete Last Position or Delete All
Position option from the Speed Position Management menu. Please note that all of your
existing speed cam positions are deleted once the Delete All Position option is selected. Make
sure you are ready to recreate your custom speed cam positions before running this option.