Service and Maintain

System board
Description Spare part number
System board for use in HP 205 G1 models:
●
AMD E1-2500 APU for use in models without Windows 8 751275-001
●
AMD E1-2500 APU for use in models with Windows 8 Standard 751275-501
●
AMD E1-2500 APU for use in models with Windows 8 Professional 751275-601
System board for use in HP 18 models:
●
Intel Pentium J2900 processor for use in models without Windows 8.1 782107-001
●
Intel Pentium J2900 processor for use in models with Windows 8.1 Standard 782107-501
●
Intel Pentium J2900 processor for use in models with Windows 8.1 Professional 782107-601
●
Intel Celeron J1800 processor for use in models without Windows 8.1 782108-001
●
Intel Celeron J1800 processor for use in models with Windows 8.1 Standard 782108-501
●
Intel Celeron J1800 processor for use in models with Windows 8.1 Professional 782108-601
The system board is located on the right side of the computer (viewed from the rear). It is secured with eight
Torx screws.
To remove the system board:
1. Prepare the computer for disassembly (see Preparing to disassemble the computer on page 18).
2. Remove the rear cover (see
Rear cover on page 19).
3. Remove the system board cover (see
System board cover on page 38).
4. Remove the memory modules (see
Memory on page 40).
5. Remove the WLAN module (see
WLAN module on page 42).
6. Disconnect all cables from the system board, noting their location for reinstallation.
System board 45