Service and Maintain

Webcam module
Description Spare part number
Webcam module 752344-001
On products that ship with a webcam module, the module is located at the top of the computer beneath the
top panel. It is secured with two silver Phillips screws and has one connector.
The webcam module is optional.
To remove the webcam module:
1. Prepare the computer for disassembly (see
Preparing to disassemble the computer on page 18).
2. Remove the rear cover (see
Rear cover on page 19).
3. Press the tabs on each side of the webcam module and lift it up away from the tabs.
4. Rotate the assembly to gain access to the connector on the module, and then disconnect the cable from
the module.
5. To remove the module from the bracket, remove the two Phillips screws that secure the module, and
then separate the module from the bracket.
Webcam module 21