- HP Network Switch User Manual
Table Of Contents
- ProCurve Switch 1700-8 and 1700-24 Management and Configuration Guide
- Title Page
- Copyright and Disclaimer Notices
- Contents
- 1. Getting Started
- 2. Using the ProCurve Web Browser Interface
- Overview
- Navigating the Web Browser Interface
- Web Configuration
- Displaying System Information
- Displaying the System Name
- Setting the Switch’s IP Address
- Configuring the Logon Password
- Rate Limits
- Port Configuration
- Port Mirroring
- Showing Port Statistics
- Trunk Membership
- Trunk Configuration
- LACP Settings
- LACP Status
- VLAN Setup
- VLAN Port Config
- LLDP Configuration
- LLDP Neighbor Table
- SNMP Configuration
- Ping Test
- Restore to Factory Defaults
- Reboot Switch
- Upload/Download Configuration
- Download Text Readable Configuration/Status File
- Update Software
- Support
- 3. Troubleshooting
- Index
- Back Cover
2-37
Using the ProCurve Web Browser Interface
Web Configuration
Using the ProCurve Web
Browser Interface
Update Software
Updates the switch software using a file provided by ProCurve Networking.
Click on the “Browse” button to select the software file. Press the APPLY
button to update the selected switch software file. You can download software
files for your switch from the support section of the ProCurve Networking
Web site at www.procurve.com.
Field Attributes
• Current Software Version – Displays the current software version
in the switch.
• Software File – Click on the “Browse” button to select the software
file.
Web – Click Support, Update Software.