- HP Network Switch User Manual
Table Of Contents
- ProCurve Switch 1700-8 and 1700-24 Management and Configuration Guide
- Title Page
- Copyright and Disclaimer Notices
- Contents
- 1. Getting Started
- 2. Using the ProCurve Web Browser Interface
- Overview
- Navigating the Web Browser Interface
- Web Configuration
- Displaying System Information
- Displaying the System Name
- Setting the Switch’s IP Address
- Configuring the Logon Password
- Rate Limits
- Port Configuration
- Port Mirroring
- Showing Port Statistics
- Trunk Membership
- Trunk Configuration
- LACP Settings
- LACP Status
- VLAN Setup
- VLAN Port Config
- LLDP Configuration
- LLDP Neighbor Table
- SNMP Configuration
- Ping Test
- Restore to Factory Defaults
- Reboot Switch
- Upload/Download Configuration
- Download Text Readable Configuration/Status File
- Update Software
- Support
- 3. Troubleshooting
- Index
- Back Cover
2-22
Using the ProCurve Web Browser Interface
Web Configuration
Using the ProCurve Web
Browser Interface
LACP Status
Displays the status of the LACP groups.
Field Attributes
Aggregation Information
• Aggregation Group – Displays the ID number of the LACP group.
• Partner MAC Address – Displays the MAC address of a device in
the LACP group that is attached to this switch.
• Local Port Aggregated – Displays port member list of the local
LACP group. The port members are port on this switch.
• Seconds Since Last Changed – Number of seconds since the last
LACP was received.
LACP Port Status
• Port – The port number.
• Protocol Active – Indicates if the port is a member of an active LACP
group.
• Partner Port Number – A list of port numbers assigned to the link
by the LACP partner.
• Operation Port Key – The current operational value of the key for
the LACP group.