- HP Network Switch User Manual

2-5
Using the ProCurve Web Browser Interface
Web Configuration
Using the ProCurve Web
Browser Interface
Web Configuration
Displaying System Information
You can display a complete summary of identity, IP Address, port, Trunk/LACP,
and VLAN information for the switch.
Field Attributes
System Identity
• System Name – Name assigned to the switch system.
• System Location – Description of the switch location.
• System Contact – Contact information assigned to the switch.
• Number of Ports – Number of built-in ports.
• Hardware Version – Hardware version of the main board.
• Software Version – Version number of the code.
• Serial Number – The serial number of the switch.
Address Information
• Management VLAN – ID of the configured VLAN (1-4093, no leading
zeroes). By default, all ports on the switch are members of VLAN 1.
However, the management station can be attached to a port belonging
to any VLAN, as long as that VLAN has been assigned an IP address.
• IP Address – Address of the VLAN to which the management station
is attached. (Default: 192.168.2.10)
• Subnet Mask – This mask identifies the host address bits used for
routing to specific subnets. (Default: 255.255.255.0)
• Gateway IP Address – IP address of the gateway router between the
switch and management stations that exist on other network
segments. (Default: 0.0.0.0)
• MAC Address – The physical layer address of the switch.
Port Information
•Port – Indicates the port number.
• Typ e – Indicates the port type (10/100/1000-T or M).
• Link Status – Indicates if the link is Up or Down.