User Manual
Table Of Contents
- Getting started
- Important safety information
- More HP resources
- Getting to know your monitor
- Setting up the monitor
- Using the monitor
- Downloading software and utilities
- The Information file
- The Image Color Matching file
- Enabling G-SYNC compatibility (select products only)
- Using the OSD menu
- Using the OSD function buttons
- Reassigning the function buttons
- Camera
- Changing the Power Mode setting (select products only)
- Using Auto-Sleep Mode (select products only)
- Setting up Windows Hello facial recognition
- Using PiP and PbP (select products only)
- Adjusting blue light output (select products only)
- Using low blue light mode (select products only)
- Support and troubleshooting
- Maintaining the monitor
- Technical specifications
- Accessibility
- Index
3. After adjusting the Clock, if ickering, blurring, or bars appear on the screen, proceed to adjust the Phase.
To remove ickering or blurring (Phase):
1. Press the Menu button to open the OSD menu, select Image, and then select Clock and Phase.
2. Select Phase, and then use the OSD buttons on the monitor that display up and down arrow icons to
eliminate ickering or blurring. Flickering or blurring might not be eliminated, depending on the computer
or graphics controller card installed.
To correct screen position (Horizontal Position or Vertical Position):
1. Press the Menu button to open the OSD menu, select Image, and then select Image Position.
2. Press the OSD buttons on the monitor that display up and down arrow icons to properly adjust the
position of the image in the display area of the monitor. The Horizontal Position shifts the image left or
right; the Vertical Position shifts the image up or down.
Optimizing image performance (analog input) 27