User Manual

Connecting USB devices (select products only)
Use USB ports to connect devices such as a digital camera, USB keyboard, or USB mouse. There are USB ports
on the monitor to connect to a device (downstream): two USB Type-A ports on the rear, and two USB Type-A
ports on the side.
NOTE: You must connect the USB Type-B cable from the source device (computer) to the rear of the
monitor to enable the USB Type-A ports to serve as a USB hub for a mouse, keyboards, phones, external
hard drives, and practically anything that is USB-connected and can accept 5 V.
Table 1-4 USB port locations
USB Ports
(1) USB Type-B ports
(2) USB Type-A ports (2)
(3) USB Type-A ports (2)
Adjusting the monitor (select products only)
To support an ergonomic work space, your monitor oers the adjustment options outlined in this section.
WARNING! To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper
workstation setup and proper posture, health, and work habits for computer users. The Safety & Comfort
Guide also provides important electrical and mechanical safety information. The Safety & Comfort Guide is
available on the web at http://www.hp.com/ergo.
1. Tilt the monitor head forward or backward to set it to a comfortable eye level.
NOTE: This monitor has a camera that can be tilted to the following specications: -5 to 20°.
Connecting USB devices (select products only)
13