User Manual
Table Of Contents
- Getting started
- Important safety information
- More HP resources
- Getting to know your monitor
- Setting up the monitor
- Using the monitor
- Downloading software and utilities
- The Information file
- The Image Color Matching file
- Enabling G-SYNC compatibility (select products only)
- Using the OSD menu
- Using the OSD function buttons
- Reassigning the function buttons
- Camera
- Changing the Power Mode setting (select products only)
- Using Auto-Sleep Mode (select products only)
- Setting up Windows Hello facial recognition
- Using PiP and PbP (select products only)
- Adjusting blue light output (select products only)
- Using low blue light mode (select products only)
- Support and troubleshooting
- Maintaining the monitor
- Technical specifications
- Accessibility
- Index
Attaching the monitor stand
Correctly attaching your monitor stand is critical for safe use. This section describes how to safely attach a
stand.
TIP: Consider the placement of the monitor, because surrounding light and bright surfaces might cause
interfering reections.
NOTE: The procedures for attaching a monitor stand might be dierent on other models.
1. With the monitor placed facedown inside the box, tear open the packaging bag along the tear line.
2. Slide the top of the mounting plate on the stand under the upper lip of the recess in the back of the panel
(1).
3. With the monitor still placed facedown inside the box, insert the base into the bottom of the monitor
stand (1), and then swivel the base counterclockwise to lock it in place (2). Conrm that the arrow on
Attaching the monitor stand
7