User Manual

Table 1-3 Bottom and side components and their descriptions (continued)
Component Description
(11) USB ports (2) Connect a USB cable to a peripheral device, such as a keyboard, mouse, or USB hard drive,
and charge peripheral devices.
(12) USB port with HP Sleep and
Charge
Connects a USB device, provides high-speed data transfer, and charges small devices such
as a smartphone, even when the computer is o with OSD Performance mode on.
(13) USB port Connects a USB cable to a peripheral device, such as a keyboard, mouse, or USB hard
drive, and charges peripheral devices.
Locating the serial number and product number
Depending on the product, the serial number and product number are located on a label on the rear of
the monitor or on a label under the front bezel of the monitor head. You might need these numbers when
contacting HP for support.
Setting up the monitor
This section describes attaching the monitor stand or wall mount and the options for connecting your monitor
to a PC, notebook, gaming console, or similar device.
WARNING! To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper
workstation setup and proper posture, health, and work habits for computer users. The Safety & Comfort
Guide also provides important electrical and mechanical safety information. The Safety & Comfort Guide is
available on the web at http://www.hp.com/ergo.
IMPORTANT: To prevent damage to the monitor, do not touch the surface of the LCD panel. Pressure on the
panel can cause nonuniformity of color or disorientation of the liquid crystals. If this occurs, the screen will
not recover to its normal condition.
IMPORTANT: To prevent the screen from getting scratched, defaced, or broken and to prevent damage to
the control buttons, position the monitor facedown on a at surface covered with protective sheet foam or a
nonabrasive cloth.
6
Chapter 1 Getting started