User's Guide

3-28
Converting 2.6-Gb-Drive Jukeboxes to 5.2-Gb-Drive Jukeboxes
Converting From Jukeboxes Using 2.6-Gbyte Drives to Jukeboxes
Using 5.2-GByte Drives
Step 6: Install the Slot/Drive Map
NOTE If you are installing only a C5139 kit to convert to a six-drive jukebox, use the
4/6-drive map.
If you are also installing a C1158J/K/L kit with the C5139J/K/L kit and making a
10-drive jukebox, use the 10-drive map.
1. Place the replacement drive map label over the previous label.
The drive map label is located on the inside of the left middle access panel (see
Figure 3-1).
2. Go to “Step 7: Install RFI Modifications” on page 3-29.