User's Guide

3-3

Converting 2.6-Gb-Drive Jukeboxes to 5.2-Gb-Drive Jukeboxes

Record Configurations

1. If jukebox is not on, turn it on.

2. Ensure that there is no disks in the drives.

Execute EMPTY DRIVES from the control panel TEST * menu, if necessary.

IMPORTANT Record the jukebox configuration settings so that the settings may be restored after

the conversion.

3. Record the jukebox configuration settings using the CONF * menu.

RECORD THE SETTINGS IN THE TABLE ON PAGE 5-4. You may want to

refer to this information after the conversion.

CAUTION Do not switch off power to the jukebox until you are sure the SCSI bus is inactive.

Switching off the jukebox when the SCSI bus is active can cause data loss and/or

indeterminate bus states.