User's Guide

2-22
Upgrading Drives and Capacity in 5.2-Gb Drive Jukeboxes
Upgrading Drives (C1154J/K/L, C1158J/K/L Kits)
Figure 2-19 Attaching SCSI Interface Label
Step 8: Install the Slot/Drive Map
1. Remove the lower and middle panels on the left side of the jukebox (see Figure
3-1).
2. Place the replacement drive map label over the previous label.
The drive map label is located on the inside of the left middle access panel.
3. Go to Chapter 4, “Checking/Downloading Firmware.”