User's Guide

2-14
Upgrading Drives and Capacity in 5.2-Gb Drive Jukeboxes
Upgrading Drives (C1154J/K/L, C1158J/K/L Kits)
Step 3: Mount the Three Drive Enclosures (With Drives) in the
Lower Drive Area
1. Remove the cover plates for drive positions #4, #5, and #6 (see Figure 2-8.
Remove the two T-20 screws on each plate.
2. Insert the three enclosures into the three open drive mount locations in the lower
drive area.
3. Secure the enclosures with two T-20 screws on each side.
4. Connect the cables from the all drive enclosures to the interposer PCA.
• #1 - drive power cable (for both drives)
• #2 - drive interface cable (split, one for each drive)
• #3 - drive enclosure fan power cable
• #4 - SCSI cable (to both drives)
Figure 2-12 Removing Drive Enclosure at Position #3