QuickSpecs

General Site Preparation
General Site PreparationGeneral Site Preparation
General Site Preparation
Rules
RulesRules
Rules
AC Power Requirements
AC Power RequirementsAC Power Requirements
AC Power Requirements
The modular, N+1 power shelf assembly is called the Front End Power Subsystem (FEPS). The
redundancy of the FEPS is achieved with 6 internal Bulk Power Supplies (BPS), any five of which can
support the load and performance requirements.
Input Options
Input OptionsInput Options
Input Options
Reference the Site Preparation Guide for detailed power configuration options.
Input Power Options
Input Power OptionsInput Power Options
Input Power Options
PDCA
PDCAPDCA
PDCA
Product
ProductProduct
Product
Number
NumberNumber
Number
Source
SourceSource
Source
Type
TypeType
Type
Source Voltage
Source VoltageSource Voltage
Source Voltage
(nominal)
(nominal)(nominal)
(nominal)
PDCA
PDCAPDCA
PDCA
Required
RequiredRequired
Required
Input Current
Input CurrentInput Current
Input Current
Per Phase
Per PhasePer Phase
Per Phase
200-240 VAC
200-240 VAC200-240 VAC
200-240 VAC
Power Required
Power RequiredPower Required
Power Required
A5800A
Option 006
3-
phase
Voltage range
200-240 VAC,
phase-to-phase,
50/60 Hz
4-wire 44 A
Maximum per
phase
2.5 meter UL power cord and OL
approved plug provided. The
customer must provide the mating in
line connector or purchase quantity
one A6440A opt 401 to receive a
mating in line connector. An
electrician must hardwire the in-line
connector to 60 A/63 A site
power.
a,b,c
A5800A
Option 007
3-
phase
Voltage range
200-240 VAC,
phase-to-neutral,
50/60 Hz
5-wire 24 A
Maximum per
phase
2.5 meter <HAR> power cord and
VDE approved plug provided. The
customer must provide the mating in
line connector or purchase quantity
1 A6440A opt 501 to receive a
mating in-line connector. An
electrician must hardwire the in-line
connector to 30 A/32 A site
power.
a,b,d
a. A dedicated branch is required for each PDCA installed.
b. In the U.S.A, site power is 60 Amps; in Europe site power is 63 Amps.
c. Refer to the Option 006 and 007 Specifics Table
Option 006 and 007 Specifics TableOption 006 and 007 Specifics Table
Option 006 and 007 Specifics Table for detailed specifics related to this option.
d. In the U.S.A. site power is 30 Amps; in Europe site power is 32 Amps.
Option 006 and 007 Specifics
Option 006 and 007 SpecificsOption 006 and 007 Specifics
Option 006 and 007 Specifics
*
**
*
QuickSpecs
HP Integrity Superdome Servers 16- processor, 32-
HP Integrity Superdome Servers 16- processor, 32-HP Integrity Superdome Servers 16- processor, 32-
HP Integrity Superdome Servers 16- processor, 32-
processor, and 64- processor Systems
processor, and 64- processor Systemsprocessor, and 64- processor Systems
processor, and 64- processor Systems
Configuration
DA - 11717 Worldwide — Version 35 — December 6, 2006 Page 43