QuickSpecs HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems Overview DA - 11717 Worldwide — Version 35 — December 6, 2006 Page 1
HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems QuickSpecs Overview At A Glance The latest release of Superdome, HP Integrity Superdome supports the new and improved sx2000 chip set. The Integrity Superdome with the sx2000 chipset supports the Mad9M Itanium 2 processor at initial release. HP Integrity Superdome supports the following processors: sx2000 Dual core Itanium 2 1.6-GHz processor Itanium 2 1.6-GHz processor sx1000 Itanium 2 1.5 GHz and 1.
QuickSpecs HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems Overview Windows Server 2003, Datacenter Edition or Enterprise Edition for Itanium 2 (sx1000 and sx2000 Itanium systems) Extension of industry standard-based computing with the Windows operating system further into the enterprise data center Increased performance and scalability over 32-bit implementations Lower cost of ownership versus proprietary operating system solutions Ideal for scale up database opportu
QuickSpecs HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems Overview Superdome Service Solutions Superdome continues to provide the same positive Total Customer Experience via industry-leading HP Services, as with existing Superdome servers. The HP Services component of Superdome is as follows: HP customers have consistently achieved higher levels of satisfaction when key components of their IT infrastructures are implemented using the Solution Life Cycle.
HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems QuickSpecs Standard Features Minimum/Maximum Configurations for Superdome (sx1000 & sx2000) with Intel Itanium 2 Processors (1.5 GHz and 1.6 GHz) NOTE: : HP Superdome (sx2000) systems (Itanium 2 (1.6 GHz) '"Mad9M") support only HP UX and Windows.
HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems QuickSpecs Standard Features Memory 2 GB 2 GB 2 GB 2 GB 512 GB/ 256 GB (sx2000) 512 GB (sx1000 with DC Edition)/ 1024 GB (sx2000 with DC Edition)/ 128 GB (sx1000 with EE)/ 256 GB (sx2000 with EE) 256 GB 256 GB 256 GB Cell Boards 1 Cell Board 1 Cell Board 1 Cell Board 1 Cell Board 8 Cell Boards 4 Cell Boards 4 Cell Boards 4 Cell Boards 1 1 1 1 8 8 Cell Boards/ *2 Cell Boards 8/ *2 81/ *2 2 2 4 8(
HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems QuickSpecs Standard Features 1Requires I/O expansion cabinet if more than 4 nPARS 2Requires I/O expansion cabinet if more than 8 nPARS 31.6 Ghz Mad9M Processors only on sx1000 configurations for OpenVMS 4Windows Server 2003, Enterprise Edition is not support with mx2 modules. *NOTE: HP Superdome (sx2000) systems (Itanium 2 (1.6 GHz) '"Mad9M") support only HP UX and Windows.
HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems QuickSpecs Standard Features Maximum nPars Not Not Not Not applicable applicable applicable applicable 64 Processors / 128 Cores Processors / Cores 2/4 2/4 Memory 6 GB 6 GB 2 GB 3 Cell Boards 3 Cell Boards Datacenter Edition; 2 Cell Boards Enterprise Edition 1 1 Cell Board Cell Boards PCI X Chassis Maximum nPars 1 To be supported Q1 07 1/2 1 Not Not Not Not applicable applicable applicable applicable 1Re
HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems QuickSpecs Standard Features The HP Integrity (sx1000) Superdome servers may require a firmware update to support Intel Itanium 2 Processor/Cell Add on products shipping after June 15, 2005. Affected Intel Itanium 2 processor products for the Integrity (sx1000) Superdome are: AD003A-Intel Itanium 2 1.6 GHz 9 MB processor (2 pack) AD004A-Instant Capacity right to access Intel Itanium 2 1.
QuickSpecs HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems Standard Features Standard Hardware Features Redundant Power supplies Redundant Fans Factory integration of memory and I/O cards Installation Guide, Operator's Guide and Architecture Manual HP site planning and installation One-year warranty with same business day on-site service response (1) Requires I/O Expansion cabinet if more than 4 nPARS (2) Requires I/O Expansion cabinet if more than 8 nPARS DA - 11717
HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems QuickSpecs Configuration There are three basic building blocks in the Superdome system architecture: the cell, the crossbar backplane and the PCI-X based I/O subsystem. Cabinets (sx1000 & sx2000) Starting with the sx1000 chip set, Superdome servers will be released with the Graphite color. A Superdome system will consist of up to four different types of cabinet assemblies: One Superdome left cabinet.
QuickSpecs HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems Configuration systems use the 1 GB, 2 GB or 4 GB DIMMs only) Voltage Regulator Modules (VRM) Data buses Optional link to 12 PCI X I/O slots Crossbar Backplane Sx2000: Each backplane contains 3 independent crossbar fabrics resulting in a robust highly available system. A High speed serial (HSS) link technology is employed for crossbars interconnect. Each backplane cabinet can support up to eight cells.
QuickSpecs HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems Configuration Core I/O (required by sx1000 systems only, sx2000 systems do not have a core I/O) The core I/O in Superdome provides the base set of I/O functions required by every Superdome partition. Each partition must have at least one core I/O card in order to boot.
QuickSpecs HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems Configuration OpenVMS Core I/O The core I/O card's primary functions are: (A6865A)(sx1000 systems (A6865A) Partitions (console support) including USB and RS 232 connections only, sx2000 systems do 10/100Base T LAN (general purpose) not have core I/O) Other common functions, such as Ultra320 SCSI, Fibre Channel, and Gigabit Ethernet, are not included on the core I/O card.
QuickSpecs HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems Configuration Peripheral Support All peripherals qualified for use with Superdome and/or for use in a Rack System E or Universal 10K G2 are supported in the I/O expansion cabinet as long as there is available space. Peripherals not connected to or associated with the Superdome system to which the I/O expansion cabinet is attached may be installed in the I/O expansion cabinet.
QuickSpecs HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems Configuration Partitions Superdome can be configured with hardware partitions, (nPars). Given that Windows Server 2003, SuSE SLES 9, Red Hat (RHEL) AS 3 and 4, and OpenVMS do not support virtual partitions (vPars), Superdome systems running Windows Server 2003, Datacenter Edition or *Enterprise Edition, SuSE SLES 9, Red Hat RHEL AS 3 and 4, or OpenVMS, do not support vPars.
QuickSpecs HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems Configuration Windows Server 2003, Datacenter edition for Itanium-based systems HP Product Structure Product Number T2372A Pre-loaded Windows Server 2003, Datacenter Edition for Itanium 2 systems Options: 0D1 - factory integration B01 - on site installation at customer's location (must contact HP Services for a quote to install onsite!) ABA - English localization only (other languages, Ger, Fre, Ita available
QuickSpecs HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems Configuration The table below highlights which processors can co-exist on a Superdome in separate hard partitions.
QuickSpecs HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems Configuration Step #5: Some I/O cards may need to be added for that specific hard partition (Windows does not support the identical set of I/O cards that HP-UX 11i supports) Step #6: Load operating system for Itanium 2-based partition The in-box addition of Itanium 2 processors can be done with no additional hardware, no new chassis and no change to backplane.
QuickSpecs HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems Configuration hard partition to that Integrity Superdome and continue the execution of the application while it is certified. 8) Why can't PA-8700+ processors be mixed with Itanium 2 9M processors? For years, HP has had a high level of investment protection with the HP 9000 Superdome.
HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems QuickSpecs Configuration (HP-UX 11i v1) in a mixed configuration is going to require a PA-RISC Firmware update. NOTE: HP-UX 11iV2 is the only HP-UX version supported on sx2000 based systems. 11) Does a customer have to power down when they add an Itanium-based partition to a PA-RISCbased Superdome? It depends. If the existing PA-RISC based partitions are running HP-UX 11i v2 and PDC 22.
QuickSpecs HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems Configuration firmware and management tools (sx1000 systems only) Processor PA8800 PA8900 Itanium 2 1.6 GHz Operating System HPUX 11.i v1 HWE 0312 (with patches) HPUX 11.i v1 HWE 0406 HPUX 11.i v1 HWE 0412 HPUX 11.i v2 HWE 0409 HPUX 11.i v2 HWE 0505 HPUX 11.i v1 HWE 0412 HPUX 11.i v2 HWE 0409 HPUX 11.i v2 HWE 0505 HPUX 11.i v2 HWE 0409 HPUX 11.
QuickSpecs HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems Configuration Possible upgrades: If it is important to be able to use the Parmgr GUI on the PA HPUX 11i v1 you can upgrade HPUX to HWE 0412 and follow the process in Scenario 2. If a customer upgrades to any 11i v1 HWE beyond HWE 0412 (HWE 0509 and later) then the proper nPar provider is already included in the HWE and the firmware upgrades in Scenario 2 are sufficient to get full functionality.
QuickSpecs HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems Configuration WLM: WLM (workload manager) currently uses the Unix command "uname -i" to ensure that all the partitions it is managing are on the same Superdome. WLM verifies that all the managed partitions "uname -i" values match. It turns out the Integrity partitions and PA partitions on the same Superdome do not return the same value for "uname -i".
QuickSpecs HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems Configuration operation. NOTE: Dynamic memory resilience is not supported when running Windows Server 2003, SUSE SLES 9,r Red Hat RHEL AS 3, or OpenVMS in the partition. Hardware and software memory scrubbing Redundant DC conversion Cell ICAP. NOTE: Cell ICAP is not supported when Windows Server 2003 SUSE SLES 9, Red Hat RHEL AS 3, or OpenVMS V8.2-1 is running in the partition.
QuickSpecs HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems Configuration Multi-system High Availability HP-UX 11i v2 Any Superdome partition that is protected by Serviceguard or Serviceguard Extension for RAC can be configured in a cluster with: Another Superdome with like processors (i.e., both Superdomes must have Itanium 2 1.6 GHz processors or both Superdomes must have mx2 processor (sx1000 systesm only) modules in the partitions that are to be clustered together.
QuickSpecs HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems Configuration EMC CLARiiON FC4700 EMC CLARiiON CX200/CX400/CX600 EMC CLARiiON CX300/CX500/CX700 EMC Symmetrix 8000 Family EMC DMX 800/1000/2000/3000 HP has qualified and supports the following capabilities with Integrity Superdome and MSCS: Active/Active and Active/Passive MSCS clusters Partition size: Any size from 2 processors up to 64 processors can be in a cluster HP supports anywhere from 2 nodes in an MSC
QuickSpecs HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems Configuration Below is the ordering information for Windows Server 2003 Datacenter Edition (for Itanium 2 based HP Integrity Superdome only). To order a system with Windows Server 2003 Datacenter Edition, you must order the T2372A product number with English or Japanese localization (option ABA or ABJ), and the appropriate license to use option code (002 through 064).
QuickSpecs HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems Configuration Below is the ordering information for Windows Server 2003 Enterprise Edition (for Itanium 2 based HP Integrity Superdome only). NOTE: All orders for systems using Windows Server 2003 Enterprise Edition (64 bit) must contain T2373A or T2369AA Foundation Pack for Windows LTU but not both. Windows Server 2003, Enterprise Edition is not supported with mx2 modules.
QuickSpecs HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems Configuration Network Adapter Teaming with Windows Server 2003 Windows Server 2003 supports NCU, NIC Configuration Utility. This is the same NCU that is available to Proliant customers. This NCU has been ported to 64 bit Windows Server 2003 and is included with every SmartSetup CD that comes with a Windows partition on Integrity Superdome.
QuickSpecs HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems Configuration Service Processor (MP) The service processor (MP) utility hardware is an independent support system for nPartition servers. It provides a way for you to connect to a server complex and perform administration or monitoring tasks for the server hardware and its nPartitions.
HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems QuickSpecs Configuration Support Management Station Statio (SMS) The Support Management Station (SMS) runs the Superdome scan tools that enhance the diagnosis and testability of Superdome. The SMS and associated tools also provide for faster and easier upgrades and hardware replacement.
QuickSpecs HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems Configuration These can each drive different solutions to the console access requirement. The considerations listed below apply to the design of provision of console access to the server. These must be considered during site preparation. The Superdome server can be operated from a VT100 or an hpterm compatible terminal emulator.
QuickSpecs HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems Configuration Windows Server 2003 For Windows Server 2003 customers desiring uninterrupted visibility to the Superdome Windows partition, it is recommended that customers purchase an IP console solution separately to view the partition while the OS is rebooting (in addition to normal Windows desktop if desired).
HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems QuickSpecs Configuration Support The following matrix describes the supported SMS and recommended console devices for all Superdomes.
QuickSpecs HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems Configuration Runs HP's proven highly effective JTAG scan diagnostic tools, which offer rapid fault resolution to the failing wire. Console log storage and viewing Event log storage and viewing Partition and memory adviser flash applications Supports updating platform and system firmware.
QuickSpecs HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems Configuration Software Requirements All SMS software is preloaded in the factory and delivered to the customer as a complete solution. The UNIX rx2600 SMS supports only HP UX 11i at this time. Current versions of the SMS software have not been qualified for 64 bit Windows. The Windows ProLiant SMS/Console will run Windows 2000 SP4 as the default operating system.
HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems QuickSpecs Configuration Mixed Superdome Environments Some important rules regarding SMS/Console support in mixed Superdome environments: 1. PA-8700 Superdomes require scan and console traffic to be isolated on separate networks 2. Integrity Superdomes do not require scan and console traffic to be isolated on separate networks 3. The Windows ProLiant SMS cannot be used to manage PA-8700 Superdomes 4.
QuickSpecs HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems Configuration and delegated using role based security. self-optimizing kernel changes. The new HP-UX Kernel HP-UX Kernel Configuration-for Configuration Configuration tool allows users to tune both dynamic and static kernel parameters quickly and easily from a Web based GUI to optimize system performance. This tool also sets kernel parameter alarms that notify you when system usage levels exceed thresholds.
QuickSpecs HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems Configuration Support for Web Console that provides secure text mode access to the management processor Reporting of error events from system firmware. Ability to trigger the task of PCI OL* from the management processor. Ability to scan a cell board while the system is running.
QuickSpecs HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems Configuration System Management Homepage displays critical management information through a simple, task oriented user interface. All system faults and major subsystem status are now reported within the initial System Management Homepage view. In addition, the new tab-based interface and menu structure provide one click access to server log.
HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems QuickSpecs Configuration Ability to trigger the task of PCI OL* from the management processor. NOTE: Online addition/replacement (OLAR) is not supported when running Red Hat or SUSE in the partition. Ability to scan a cell board while the system is running.
HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems QuickSpecs Configuration General Site Preparation AC Power Requirements Rules The modular, N+1 power shelf assembly is called the Front End Power Subsystem (FEPS). The redundancy of the FEPS is achieved with 6 internal Bulk Power Supplies (BPS), any five of which can support the load and performance requirements. Input Options Reference the Site Preparation Guide for detailed power configuration options.
HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems QuickSpecs Configuration PDCA Product Number A5800A Option 006 A5800A Option 007 Attached Power Cord OLFLEX 190 (PN 600804), fourconductor, 6-AWG (16 mm2), 600Volt, 60-Amp, 90degree C, UL, and CSA approved, conforms to CE directives GN/YW ground wire. Five conductors, 10-AWG (6 mm2), 450/475-Volt, 32Amp, European wire cordage, GN/YW ground wire.
HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems QuickSpecs Configuration Ground Leakage Current (mA) >3.5 mA, with 6 BPSs installed Warning label applied to the PDCA at the AC Mains input Cooling Requirements The cooling system in Superdome was designed to maintain reliable operation of the system in the specified environment. In addition, the system is designed to provide redundant cooling (i.e.
QuickSpecs HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems Configuration HP has entered into an agreement with Liebert to reference sell the DataCool solution The HP/Liebert business relationship is managed by the HP Complementary Products Division. DataCool will be reference by HP. Liebert will perform installation, service and support.
HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems QuickSpecs Configuration Product Number/ Description SL20KFB2 APC Silcon 3-phase UPS Quantity/ Configuration Quantity 2 32- or 64processor dualcord/dual-UPS with main-tiemain Quantity 1 32- or 64processor singlecord/single-UPS Quantity 1 32- or 64processor dualcord/dual-UPS with main-tiemain Quantity 0 32- or 64processor singlecord/single-UPS Quantity 2 32- or 64processor dualcord/dual-UPS with main-tiemain Quantity 1 32-
HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems QuickSpecs Configuration Power Protection Runtimes The UPS will provide battery backup to allow for a graceful shutdown in the event of a power failure. Typical runtime on the APC SL20KFB2 Silcon 3 Phase UPS varies with the kW rating and the load. The APC SL20KFB2 UPS provides a typical runtime of 36.7 minutes at half load and 10.7 at full load.
QuickSpecs HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems Configuration Description General Features Includes Documentation Network interface cards that provide standards-based remote management of UPSs Boot-P support, Built-in Web/SNMP management, Event logging, Flash Upgradeable, MD5 Authentication Security, Password Security, SNMP Management, Telnet Management, Web Management CD with software, User Manual User Manual Installation Guide Type of UPSs Some customer
HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems QuickSpecs Configuration Category General Processor Memory Rule Index 1 2 3 4 5 6 7 8 9 10 11 12 13 I/O 14 Performance 15 16 17 18 19 20 21 22 23 24 25 Rule Description Every Superdome complex requires connectivity to a Support Management Station (SMS). The PC-based SMS also serves as the system console. Every cell in a Superdome complex must be assigned to a valid physical location.
HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems QuickSpecs Configuration 26 27 28 29 If a partition contains 4 or fewer cells, all the cells should be linked to the same crossbar (quad) in order to eliminate bottlenecks and the sharing of crossbar bandwidth with other partitions. In each Superdome cabinet, slots 0, 1, 2 and 3 link to the same crossbar and slots 4, 5, 6 and 7 link to the same crossbar.
HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems QuickSpecs Configuration Single System High Availability 36 37 38 39 40 41 42 43 44 45 46 47 Multi-System High Availability (Please also refer to Multi-System High Availability section following this table) 48 Each cell should have at least two active processors. Each cell should have at least 4 GB (8 DIMMs) of memory using 512 MB DIMMs (sx1000 only) and at least 8 GB of memory using 1 GB DIMMs.
HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems QuickSpecs Configuration Traditional Multi-System High Availability 49 50 51 52 53 54 55 56 57 Heterogeneous Multi System High Availability 58 59 60 61 62 63 64 65 66 67 68 69 70 To configure a cluster with no SPOF, the membership must extend beyond a single cabinet. The cluster must be configured such that the failure of a single cabinet does not result in the failure of a majority of the nodes in the cluster.
QuickSpecs HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems Configuration * Superdome 32 processor system requires an I/O expansion cabinet for greater than 4 nodes. Superdome 64 processor system requires an I/O expansion cabinet for greater than 8 nodes. NOTE: NOTE "Recommended" refers to configurations that are fully qualified and offer the best bandwidth performance.
QuickSpecs HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems Upgrades For information on Superdome System Upgrades, please refer to the Superdome Server Upgrades QuickSpec.
HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems QuickSpecs Memory Total No. of No.
QuickSpecs HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems Memory NOTES: NOTES 1. Configurations with 8, 16, or 32 DIMMs will result in the best performance 2. These are configurations that are shipped from manufacturing. Other configurations are supported, as long as they are not illegal. Total No. of 1 No.
QuickSpecs HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems Memory 56 8 24 2 GB 2 GB 2 GB 2 GB 2 GB 2 GB 2 GB 2 GB 2 GB 2 GB 2 GB 2 GB 1 GB 1 GB 1 GB 1 GB 56 24 8 4 GB 4 GB 4 GB 4 GB 1 GB 1 GB 1 GB 1 GB 1 GB 1 GB 1 GB 1 GB 1 GB 1 GB 1 GB 1 GB 64 16 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 64 16 8 4 GB 4 GB 4 GB 4 GB 2 GB 2 GB 2 GB 2 GB 2 GB 2 GB 2 GB 2 GB 64 16 8 8 4 GB 4 GB 4 GB 4 GB 2 GB 2 GB 2 GB 2 GB 1 GB 1 GB 1 GB 1 GB 1 GB 1 GB 1 GB 1 GB 64 32 2 GB 2 GB 2 GB 2 GB 2
HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems QuickSpecs Technical Specifications Superdome sx2000 Specifications SPU Description Superdome 16 processor* processor A9833A 1 - 16 SPU Product Number Number of Dual core Itanium 2 1.6 GHz processors Number of Itanium 2 1.
HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems QuickSpecs Technical Specifications 4-GB DIMMs (DDRII) DIMM Density (MB) Cell Boards 2 processor 4 processor cells Software Support HP-UX revision Windows revision 32-512 GB 32-1024 GB 1024/2048/4096 1024/2048/4096 64-2048 GB (max. is 1024 GB for Windows) 1024/2048/4096 1-4 1-8 4 - 16 HP UX 11i version 2 Windows Server 2003, Datacenter Edition for Itanium 2 .
HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems QuickSpecs Technical Specifications Number of Itanium 2 1.5 GHz or 1.6 GHz processors 2 - 16 2 - 32 Number of mx2 processors NOTE: Linux and OpenVMS do not support mx2 2 - 32 2 - 64 N/A N/A TBD N/A N/A 1,231,433 tpmC Windows Server 2003 Datacenter Edition with SQL Server 2005 64 bit version 1.5 GHz, 6 MB cache 1.6 GHz, 9 MB cache 1.1 GHz, 6 MB cache (each processor) 1.5 GHz, 6 MB cache 1.6 GHz, 9 MB cache 1.
HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems QuickSpecs Technical Specifications 1 processor (mx2 only)/2 processor 3 processor (mx2 only)/4 processor cells Software Support HP-UX revision Windows revision 1-4 1-8 HP- UX 11i version 2 Windows Server 2003, Datacenter Edition for Itanium 2; Windows Server 2003, Enterprise Edition for Itanium 2 Red Hat RHEL AS 3,and 4 /SUSE SLES 9 and 10 Linux revision on Superdome with Intel Itanium 2 processors only (not on Superdo
HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems QuickSpecs Technical Specifications Additional Interface Cards 8 8 -14 8 -14 Typical Electrical Characteristics by Configuration AC input power 200 240 VAC, 50/60 Hz 200 240 VAC, 50/60 Hz 200 240 VAC, 50/60 Hz Typical Input Power 5,900 9,800 19,600 (watts) 4 cells, 32 GB, 4 I/O 8 cells, 32 GB, 4 I/O 16 cells, 32 GB, 4 I/O dissipation Itanium 2 chassis with 6 PCI each chassis with chassis with (watts) 6 PCI each 6 PCI e
HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems QuickSpecs Technical Specifications Environmental Characteristics Acoustics Operating temperature Non operating temperature Maximum rate of temperature change Operating relative humidity Operating altitude Non operating altitude Regulatory Compliance Safety 65 dB +20° to +30° C -40° to +70° C 20° C/hour 15% to 80% @ 30°C 0 3.1 km (0 10,000 ft) 0 4.
QuickSpecs HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems Technical Specifications Typical 3 phase 4 wire 17A/Phase 29A/Phase current requirements at 200V 240V Typical 3 phase 5 wire 10A/Phase 17A/Phase current requirements at 200V 240V Maximum Electrical Characteristics Maximum input power 8,200 12,196 (VA) cabinet marked electrical AC input power-Option 200 240 VAC phase to neutral, 5 wire, 50/60 Hz 7: 3 phase 5 wire input AC input power-Option 200 240 VAC phase to
HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems QuickSpecs Technical Specifications Regulatory Compliance Safety IEC 950:1991+A1, +A2, +A3, +A4; EN60950:1992+A1, +A2, +A3, +A4, +A11; UL 1950, 3rd edition; cUL CSA C22.2 No. 950 95 Key Dates First CPL date 6/03 (sx1000); 3/06 (sx2000) First ship date 3Q03 (sx1000); 2Q06 (sx2000) *NOTE: NOTE: Given that Itanium 2 1.
QuickSpecs HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems Technical Specifications 12 slot PCI X chassis for A6864AZ (sx1000) HP rack expansion cabinet A9836AZ (sx2000) I/O Expansion Cabinet A5861A Power and Utilities Subsystem Not Applicable I/O Expansion Power and A5861D Utilities Subsystem Graphite color I/O Chassis Enclosure for A5862A (sx1000) 12 slot PCI X Chassis A9852A (sx2000) NOTE: Each ICE holds two I/O card cages or 24 PCI X I/O slots.
HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems QuickSpecs Technical Specifications Shipping height Shipping width Shipping depth Color Communications and Management Environmental Units per pallet Communications and Management Interface port SmartSlot interface quantity Pre installed SmartSlot cards Control panel Audible alarm Emergency power off (EPO) Optional management device Operating environment Operating relative humidity Operating elevation Storage temperatur
HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems QuickSpecs Technical Specifications Mass Storage Host Bus Adapters PCI 2x Fibre Channel PCI 2 Gb/s Fibre Channel PCI-X 2 channel 2 Gb /s Fibre Channel PCI 1 port U160 SCSI A5158A A6795A A6826A H H H, O 48 48 48 96 96 96 192 192 192 A6828A H 48 96 192 PCI 2 port U160 SCSI PCI 1 port 4Gb FC card (PCIX266) PCI 1 port 4Gb FC card (PCIX 266) PCI 2 port 4Gb FC card (PCIX 266) A6829A AB378A LC H H, O 48 48 96 96
HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems QuickSpecs Technical Specifications PCI-X 4Gb Fiber Channel Adapter FC2143BR AD167A PCI-X 2P 4Gb Fiber Channel Adapter FC2243BR AD168A PCI-X 4 Gb Fibre Channel Adapter FC1114BR AB429A Smart Array P600 serial attached SCSI (SAS) Controller - for external storage connect only (Maximum cable length for P600/MSA50 connect is 4 meters).
HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems QuickSpecs Technical Specifications PCI X 1 channel 2 Gb /sFibre Channel Windows AB467A LC W 32 32 32 A4926A A4929A A5230A RJ 45 RJ-45 RJ-45 H H H 16 16 24 32 32 48 64 64 96 PCI 4 port 100Base TX PCI 1 port 1000Base T (gigabit copper) A5506B A6825A RJ-45 RJ-45 H H, O 8 16 16 32 32 64 PCI 1 port 1000Base SX (gigabit fiber) A6847A Duplex SC H, O 16 32 64 PCI 1 port 1000Base SX (gigabit fiber) PCI-X
HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems QuickSpecs Technical Specifications HP PCI-X 2-port 4X Fabric (HA & DB) Adpt HP PCI-X 10 GigE PCI-X 10GbE LAN Adapter AB345A 4x Infiniband Copper Duplex LC Duplex LC H 16 32 64 H W 81 8 81 8 161 8 374191-B22 H 16 32 64 374193-B22 H 16 32 64 VHDCI/RJ-45 H1 8 16 32 LC H, V 48 96 192 1 LC, 1 RJ-45 H 48 96 192 2 LC H 48 96 192 SCSI - LVD/SE LAN - RJ-45 H 48 96 192 H, W, L, O 1 1
HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems QuickSpecs Technical Specifications PCI 64-port Terminal Multiplexer A6749A RS-232 or RS422 H 8 14 14 1 Maximum cards are two per I/O chassis. Therefore: 16 processor=8 maximum, 32 processor=16 maximum, and 64 processor=32 maximum.
HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems QuickSpecs Technical Specifications PCI-X 4Gb Fiber Channel Adapter FC2143BR AD167A PCI X 2 channel 2 Gb /sFibre Channel Windows AB466A PCI X 1 channel 2 Gb /sFibre Channel Windows AB467A Local Area Network (LAN) Adapters PCI-X 4-Gb Fiber Channel AD167A Adapter FC2143BR (Windows maximum=24 per partition/system) W 24 24 24 LC W 16 16 16 LC W 32 32 32 LC W, L 24 (W) PCI-X 2P 4-Gb Fiber Channel Adapter
HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems QuickSpecs Technical Specifications PCI 1 port 802.
HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems QuickSpecs Technical Specifications HP Linux 133MHz 10GbE SR Fiber Adapter AD144A Multi-Function Cards (Mass Storage / LAN) PCI 2 port 100Base T/ 2 port A5838A Ultra2 SCSI PCI-X 2Gb Fibre Channel / A9782A 1000BaseSX Duplex LC L, W 4 8 (W) 8 (W) 8 (W) VHDCI/RJ-45 H1 8 16 32 LC H, O 48 96 192 PCI-X 2Gb Fibre Channel / 1000BaseTX A9784A 1 LC, 1 RJ-45 H, O 48 96 192 HP PCI-X Multifunction 2-port 2Gb FC
HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems QuickSpecs Technical Specifications Wide Area Network (WAN) Adapters PCI 1 port ATM 155 Mbps (MMF) A5513A 2 port Programmable Serial J3525A Interface (PSI) X.25 / Frame Relay / SDLC Additional Interface Cards PCI HyperFabric 2 Fibre1 PCI 8-port Terminal Multiplexer PCI 64-port Terminal Multiplexer HP StorageWorks Linux Q2300 64-bit HBA 1-port 4Gb FC Qlogic Duplex SC RS-530, RS232, V.35, RS-449 or X.
HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems QuickSpecs Technical Specifications The boot configuration for Windows Server 2003, Datacenter Edition Superdome partitions can be: The Smart Array 6402/6404 disk array controllers (A9890A/A9891A) connected to StorageWorks 4400 (a.k.a. MSA30) series enclosures. The SA P600 SAS controller (337972 B2) connected to the MSA50 (NOTE: NOTE: Maximum cable length available is 4 meters.
HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems QuickSpecs Technical Specifications Superdome Supported Online Storage Storage Device HP-UX 11i v2 XP 48/512 XP128/1024 VA7100 VA7400 VA 7410/7110 MSA1000 MSA1500 EVA 5000 Yes Yes Yes Yes Yes Yes No Yes EVA 3000 Yes StorageWorks 4300 series StorageWorks 4400 series (MSA30) MSA50 FC10 SC10 DS2100 No Yes No Yes Yes Yes DS2120 No DS2110 Yes DS2300 DS2405 EMC Symmetrix 3000 EMC Symmetrix 5000 EMC Symmetrix 5500 EMC
HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems QuickSpecs Technical Specifications SAN 2/8 EL SAN 2/16 SAN 2/16 EL StorageWorks Core 2/64 StorageWorks Edge 2/24 StorageWorks Edge 2/32 StorageWorks SAN Director 2/64 StorageWorks SAN Director 2/140 Yes Yes Yes Yes Yes Yes Yes Yes No No No Yes No No Yes No Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Storage Device HP-UX 11i v2 ESL9595 with SDLT 220 and 320 ESL9595 with Ultrium 230 and 460 drives
HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems QuickSpecs Technical Specifications DVD - Rack TA5300 - Tape Array (plus all supported devices in TA5300)* DDS-4 Standalone/Rack DDS-4×6 Standalone DDS-5 Standalone/Rack DLT-80 Standalone/Rack DLTVS80 Standalone/Rack Yes Yes Yes Yes Yes Yes No Yes Yes Yes Yes Yes Yes Yes No Yes No No Yes Yes Yes Yes Yes Yes Yes Yes No No *Supported devices in TA5300 are C7498A, C7497B, Q1524B, C7492B, DW019A, C7470B, Q1512B, Q1540
QuickSpecs HP Integrity Superdome Servers 16- processor, 32processor, and 64- processor Systems Technical Specifications © Copyright 2003-2006 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Microsoft and Windows Server 2003 are US registered trademarks of Microsoft Corporation. Intel and Itanium are US registered trademarks of Intel Corporation.
