Specifications

5.
If it is necessary to replace the webcam/microphone module:
a. Detach and release the webcam/microphone module as far as the webcam/microphone
module cable allows. (The webcam/microphone module is attached to the display enclosure
with double-sided tape.)
b. Disconnect the webcam/microphone cable (1) from the webcam/microphone module.
c. Remove the webcam/microphone module (2).
The webcam/microphone is available using spare part number 707767-001.
6. If it is necessary to remove the display hinges:
a.
Remove the two top screws (1) and two bottom screws (2) that secure the display hinges to
the display enclosure.
b. Remove the display hinges (3).
The display hinges are included in the Display Hinge Kit, spare part number 701683-001.
64 Chapter 4 Removal and replacement procedures