Specifications

4.
Remove the battery (see
Battery on page 30).
5. Remove the keyboard (see
Keyboard on page 31).
6.
Remove the top cover (see
Top cover on page 35).
Remove the WLAN module:
1. Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module.
NOTE: The 1/black WLAN antenna cable is connected to the WLAN module 1/Main terminal.
The 2/white WLAN antenna cable is connected to the WLAN module 2/Aux terminal.
2. Remove the Phillips screw (2) that secures the WLAN module to the system board. (The WLAN
module tilts up.)
Component replacement procedures
43