Specifications

5.
Tilt the keyboard forward (1) onto the palm rest. Release the zero insertion force (ZIF)
connector (2) to which the keyboard cable is attached, and then disconnect the keyboard cable
(3) from the system board.
6. Remove the keyboard.
Reverse this procedure to install the keyboard.
Top cover
NOTE: The top cover spare part kit includes the TouchPad support, TouchPad board and TouchPad
cable.
Description Spare part number
In ruby red finish 701703-001
In sparkling black finish 701704-001
In winter blue finish 709177-001
TouchPad button board 701685-001
IMPORTANT: Make special note of each screw and screw lock size and location during removal
and replacement.
Before removing the top cover, follow these steps:
1. Shut down the computer.
2.
Disconnect all external devices connected to the computer.
Component replacement procedures
35