System information

mSATA Solid-State drive (SSD)

Description Spare part number

64-GB mSATA SSD drive 732293-001

128-GB mSATA SSD drive 732294-001

Before removing the mSATA drive, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,

and then unplugging the AC adapter from the computer.

4. Disconnect the tablet from the keyboard dock (see

Releasing the tablet from the keyboard dock

on page 34).

5. Remove the display rear cover (see

Display rear cover on page 49).

6. Disconnect the battery cable (see

Battery cable on page 50).

Remove the mSATA drive:

1. Remove the Phillips PM2.5×3.0 screw (1) that secures the drive to the tablet.

2. Lift the drive to a 45-degree angle, and then pull it away to remove it from the socket (2).

Reverse this procedure to install the mSATA drive.

Tablet components