Maintenance and Service Guide

8. Separate the display from the computer by pulling the display up and away from the chassis (3).
9. To remove the display panel:
a. Use a plastic tool (1) to loosen around the entire display to separate it from the display enclosure
(2).
b. Remove the display panel (3).
Display panels are available using spare part number L51357-001 for FHD panels and L51358-001
for HD panels.
10. If it is necessary to replace the display cable from the display panel:
a. Peel the tape from the top of the display connector at the bottom of the panel (1).
b. Disconnect the cable from the display panel (2).
60 Chapter 5 Removal and replacement procedures for authorized service provider parts