Maintenance and Service Guide

Solid-state drive
Table 5-5 Solid-state drive description and part number
Description Spare part number
512 GB, PCIe L51361-001
256 GB, PCIe L51360-001
128 GB, SATA-3, TLC L51359-001
16 GB, PCIe (Optane Memory Module) L55350-001
Solid-state drive module foil cover L51352-001
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 29).
2. Remove the bottom cover (see Bottom cover on page 30).
3. Remove the battery (see Battery on page 32).
Remove the solid-state drive:
1. Remove the cover from atop the drive (1).
2. Remove the Phillips M2.0 × 3.0 screw (2), and then pull the solid-state drive module from the socket (3).
Reverse this procedure to install the solid-state drive.
When installing a solid-state drive, be sure to place the cover on top of the drive.
Component replacement procedures 39