Maintenance and Service Guide

4. On the left and right sides of the computer, insert a plastic tool between the bottom cover and the
computer (3), and then slide the tool from the top to the bottom of the computer (4) to separate the
bottom cover from the computer.
IMPORTANT: Be sure to follow the removal instructions to avoid damaging the hooks on the inside of
the bottom cover and computer.
5. On the bottom edge of the computer, insert a plastic tool between the bottom cover and the computer
(1), and then slide the tool from one side of the computer to the other (2) to separate the bottom cover
from the computer. At the same time, push downward on the top edge of the bottom cover (3), and then
lift the bottom cover o the computer (4).
Reverse this procedure to install the bottom cover.
Component replacement procedures 31