Maintenance and Service Guide

Bottom cover
Table 5-1 Bottom cover description and part number
Description Spare part number
Bottom cover for use in models with discrete graphics memory L51338-001
Bottom cover for use in models with UMA graphics memory L51339-001
Rubber Foot Kit L51354-001
▲ Prepare the computer for disassembly (Preparation for disassembly on page 29).
Remove the bottom cover:
1. Peel the four upper rubber feet o the bottom of the computer (1).
2. Remove the four Phillips M2.0 × 6.0 screws from under the feet (2) and the Phillips M2.0 × 4.0 screw
from the bottom edge (3).
3. On the side of the computer with the display, insert a plastic tool between the bottom cover and the
computer (1), and then slide the tool from one side of the computer to the other (2) to separate the
bottom cover from the computer.
30 Chapter 5 Removal and replacement procedures for authorized service provider parts