- Hewlett-Packard Fax Machine User Guide
Table Of Contents
- HP 1040/1050 Fax series
- Load paper 1
- Load documents to fax or copy 2
- Send a fax 2
- Receive a fax 3
- Make a copy 3
- Make a telephone call 4
- The HP Fax 1040/1050 6
- The menus 12
- Overview of menu options 13
- Loudspeaker-HP 1040 Fax 16
- Speakerphone-HP 1050 Fax 16
- Navigate the menus 17
- Enter dates, times, text, and telephone numbers 18
- Speed dialing 21
- Paper types and sizes 23
- Document types and sizes 23
- Set document resolution and contrast for a single copy 24
- Adjust volume 25
- Automatic fax redial 26
- Receiving via an extension telephone (HP 1040 Fax only) 26
- Set rings to answer 27
- Use Caller ID 28
- Block junk fax numbers 28
- Scan & Fax Mode 29
- Image TCR 29
- Distinctive ring (DRPD) 30
- Answer/receive mode 31
- Turn on the message center 35
- Record your greeting 36
- Play your greeting 36
- Screen or monitor your calls 37
- Announcement only 37
- Play back messages 37
- Erase messages 38
- Remote Access 39
- Message paging 41
- Record a conversation 41
- Broadcasting 43
- Delayed fax 44
- Polling 45
- To cancel the scheduled job 46
- Forward faxes 47
- Set the date and time 49
- Turn on and off sounds 49
- Set the fax header information 50
- Print reports 51
- Reprinting faxes 52
- Clearing memory 53
- Loudspeaker-HP 1040 Fax 53
- Speakerphone-HP 1050 Fax 53
- Redial a number in memory 54
- Print cartridge information 55
- View ink level 55
- Print the self test 56
- Replace the print cartridge 56
- Clear jammed documents and paper 58
- Maintain the print cartridge 59
- Clean the document scanner area 61
- Adjust the scanner 63
- LCD error messages 63
- Troubleshooting 66
- Paper types and sizes 71
- Document types and sizes 71
- Print cartridge 72
- Product specifications 72
- A sample of ITU #1 test chart (reduced to 60.5%) 74
- Environmental product stewardship program 75
- Regulatory notices 76
- Declaration of conformity 78
- Use Hewlett-Packard support services 79
- Hewlett-Packard LIMITED WARRANTY STATEMENT 80
- Contents
- Quick start
- HP Fax basics
- The HP Fax 1040/1050
- The menus
- Overview of menu options
- Loudspeaker-HP 1040 Fax
- Speakerphone-HP 1050 Fax
- Navigate the menus
- Enter dates, times, text, and telephone numbers
- Speed dialing
- Paper types and sizes
- Document types and sizes
- Set document resolution and contrast for a single copy
- Adjust volume
- Automatic fax redial
- Receiving via an extension telephone (HP 1040 Fax only)
- Additional features
- Digital message center (HP 1050 Fax only)
- Advanced faxing
- Feature reference
- Care and maintenance
- Specifications and regulatory information
- Index
Additional features 32
Answer/receive mode
! When no document is loaded, press the Ans.Mode/Contrast button until the desired
option displays.
HP1050 Fax
• FAX
mode
• In Ready mode,
FX
appears in the right hand corner of the
display.
• When you get a call, the machine answers and receives the fax
automatically. When reception is complete, the machine returns to
Ready mode.
• If you want to change the number of rings before it answers, see
Set rings to answer on page 27.
• AUTO
mode
• In Ready mode,
AU
appears in the right hand corner of the
display.
• When a call comes in, the machine answers it. If a fax is being
sent, the device receives the fax. If the machine does not sense a
fax signal, it will ring 5 times in a different tone to tell you it may be
a regular telephone call. If you do not pick up the handset it will try
again to receive a fax after several more rings.
• If you want to change the number of rings before it answers, see
Set rings to answer on page 27.
• TAM
mode
You must have an answering machine attached to the
EXT
line socket
located on the bottom of your HP Fax.
• In Ready mode,
TM
appears in the right hand corner of the
display.
• When a call comes in, the answering machine answers and listens.
If it detects fax tones, it receives the fax; otherwise, it records the
caller’s message.
• If you have set your machine to TAM Mode and your answering
machine is switched off or the answering machine is not connected
directly to your fax machine, the machine will automatically attempt
to receive a fax after several rings.
• If your answering machine allows you to set the number of rings
before it answers the telephone, set the answering machine to
answer an incoming call in less than 4 rings.
• When your answering machine answers an incoming call, it
records a fax tone until it realizes a fax is coming through. Due to
this, your answering machine may tell you a voice message has
been left, even when it is actually a fax.
• TEL
mode
• In Ready mode,
TL
appears in the right hand corner of the
display.
• Automatic fax reception is turned off. You can receive a fax only by
lifting the handset and pressing Start/Enter.
How are you going to use your HP Fax? Read about...
• Telephone and fax with the integrated
answering machine in the Digital
Message Center.
TAM
• Telephone and fax machine without the
answering machine.
AUTO mode