System information

To remove the WLAN module antenna and cable:

1. Prepare the computer for disassembly (see

Preparing to Disassemble the Computer on page 29).

Remove the rear cover (see

Rear Cover on page 30).

3. Remove the system board shield (see

System Board Shield on page 66).

4. Disconnect the antenna cable from the module (1), remove the cable from the clips built into the

computer (2), and then lift the antenna from the top of the computer (3).

Figure 6-53 Disconnecting the WLAN module

To install the WLAN module cable and antenna, reverse the removal procedures.

NOTE: WLAN modules are designed with a notch to prevent incorrect insertion.

WLAN Module