System information

6.
Disconnect the three cables from the board (2).
NOTE: Be careful not to damage the cables when disconnecting them from the board. Do not
pull on the wires.
Figure 6-42 Removing the inverter board
7. Remove the inverter board from the computer.
To remove the inverter board:
1. Prepare the computer for disassembly (see
Preparing to Disassemble the Computer on page 29).
2.
Remove the rear cover (see
Rear Cover on page 30).
3. Remove the optical drive (see
Optical Drive on page 36).
4. Remove the optical drive bracket (see
Optical Drive Bracket on page 59).
5. Remove the tape that secures the cable to the computer.
Inverter Board
61