Service and Maintain

Webcam Module and Cable
Description Spare part number
Webcam module cable 646786-001
The webcam module assembly is located at the top of the computer. It is secured with three screws
and has one connector. A removable bracket houses the module. The webcam cable routes along
the top of the computer from the left side of the module to the system board. Tape secures the cable
to the computer.
Figure 6-32 Webcam module location
To remove the webcam module cable:
1. Prepare the computer for disassembly (see
Preparing to Disassemble the Computer
on page 26).
2. Remove the rear cover (see
Rear Cover on page 27).
3. Disconnect the cable from the webcam module (1) and from the system board (2).
Webcam Module and Cable 49