Specifications

Power/volume button board
Description Spare part number
Power/volume button board (includes cable) 784417-001
Before removing the power/volume button board, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the back cover (see Back cover on page 19), and then remove the following components:
a. Battery (see Battery on page 22)
b. Audio jack board (see Audio jack board on page 25)
c. System board (see System board on page 26)
d. Speakers (see Speakers on page 30)
e. Webcam module (see Webcam module on page 29)
f. Remove the middle frame (see Middle frame on page 32).
Remove the power/volume button board:
1. Release the ZIF connector (1) to which the power/volume button board cable is attached, and then
disconnect the power/volume button board cable from the system board.
2. Remove the Phillips PM1.9×2.6 broad head screw (2) that secures the power/volume button board to
the display panel assembly.
Power/volume button board 33